0 1000 MHz Active Functional 67108864 67108864
1 1000 MHz Idle Functional 67108864 67108864
2 1000 MHz Idle Functional 67108864 67108864
3 1000 MHz Idle Functional 67108864 67108864
Good Memory Required : Not initialized. Defaults to 32 MB.
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
nteract with IPL (Y, N, or Cancel)?> n
Booting...
Boot IO Dependent Code (IODC) revision 3
HARD Booted.
ISL Revision A.00.44 Mar 12, 2003
ISL booting hpux
Boot
: disk(0/1/1/0.1.0.0.0.0.0;0)/stand/vmunix
14348288 + 3534848 + 4914208 start 0x14d768
alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3e900000.
DoCalllist done
Module ciss is put into ramfs:load time: driver_install, state: loaded
Module lvmp is put into ramfs:load time: driver_install, state: loaded
Module igelan is put into ramfs:load time: driver_install, state: loaded
Module iether is put into ramfs:load time: driver_install, state: loaded
Module fcd is put into ramfs:load time: driver_install, state: loaded
Module cfsm is put into ramfs:load time: driver_install, state: auto
Module cfsmdr is put into ramfs:load time: driver_install, state: auto
Module btlan is put into ramfs:load time: driver_install, state: loaded
Module procsm is put into ramfs:load time: driver_install, state: loaded
Module c8xx is put into ramfs:load time: driver_install, state: loaded
Module iomem is put into ramfs:load time: driver_install, state: auto
Module cdfs is put into ramfs:load time: driver_install, state: auto
Module cifs is put into ramfs:load time: driver_install, state: auto
Module td is put into ramfs:load time: driver_install, state: loaded
Module gelan is put into ramfs:load time: driver_install, state: loaded
Module fspd is put into ramfs:load time: driver_install, state: auto
Module fdd is put into ramfs:load time: driver_install, state: loaded
Module mpt is put into ramfs:load time: driver_install, state: loaded
Using /stand/ext_ioconfig
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 9788 MB 9788 MB 9788 MB
Kernel : 9787 MB 9787 MB 9787 MB
User : 9345 MB 8285 MB 8317 MB
-------------------------------------------------------------------------
ktracer is off until requested.
Installing Socket Protocol families AF_INET and AF_INET6
Kernel EVM initialized
Installed MemFS
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
0/2/1/0: Fabric Name Server rejected GPN_FT query.
Reason code: unable to perform request;
Explanation: FC-4 Type not registered.
This may indicate that the HBA port is not part of a zone.
Please check zone configuration on your switch.
0/6/1/0: Fabric Name Server rejected GPN_FT query.
Reason code: unable to perform request;
Explanation: FC-4 Type not registered.
This may indicate that the HBA port is not part of a zone.
Please check zone configuration on your switch.
0/2/1/0: Fabric Name Server rejected GPN_FT query.
Reason code: unable to perform request;
Explanation: FC-4 Type not registered.
This may indicate that the HBA port is not part of a zone.
Please check zone configuration on your switch.
0/6/1/0: Fabric Name Server rejected GPN_FT query.
Reason code: unable to perform request;
Explanation: FC-4 Type not registered.
This may indicate that the HBA port is not part of a zone.
Please check zone configuration on your switch.
System Console is on the Built-In Serial Interface
iether0: INITIALIZING HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0
iether1: INITIALIZING HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1
iether4: INITIALIZING HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/5/2/0
iether5: INITIALIZING HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/5/2/1
iether2: INITIALIZING HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/5/1/0
iether3: INITIALIZING HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/5/1/1
AF_INET socket/streams output daemon running, pid 49
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Checking root file system.
file system is clean - log replay is not required
Root check done.
NOTICE: return ramfs memory for BTL: [FREE] top 0x00000002c4300000, pages 3742
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 10483712 Kbytes, lockable: 7614312 Kbytes, available: 8685532 Kbytes
/sbin/ioinitrc:
/sbin/krs_sysinit:
* The module 'rng' has been loaded.
insf: Installing special files for ipmi instance 0 address 16
insf: Installing special files for pseudo driver framebuf
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" is already active on this system.
Resynchronized volume group /dev/vg00
Checking hfs file systems
/sbin/fsclean: /dev/vg00/lvol1 (mounted) ok
HFS file systems are OK, not running fsck
Checking vxfs file systems
UX:vxfs fsck: INFO: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 OK
UX:vxfs fsck: INFO: V-3-20915: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 OK
Cleaning /etc/ptmp...
(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2006 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
Confidential computer software. Valid license from HP required for
possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.
/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)
ovc instance NOT running
HP-UX Start-up in progress
__________________________
Configure system crash dumps ................................ OK
Removing old vxvm files ..................................... OK
Mount file systems .......................................... OK
Remounting Root File System ................................. OK
Setting hostname ............................................ OK
Start containment subsystem configuration ................... OK
Set privilege group ......................................... N/A
Display date ................................................ N/A
Copy processor logs to /var/tombstones ...................... OK
Save system crash dump if needed ............................ N/A
Start evp ................................................... OK
Enable auxiliary swap space ................................. OK
Start syncer daemon ......................................... OK
Initializing livedump ....................................... N/A
Start Utmp Daemon : manages User Accounting Database ........ OK
Configure Loopback interfaces (lo0) ......................... OK
Reconfiguring setboot event subscription .................... OK
Starting Event Management (EVM) (phase 1) ................... OK
Start Essential Services monitoring daemon .................. OK
Continuing install jobs, configuring filesets ............... OK <-- En este punto el sistema puede demorar varios minutos
Configuring all unconfigured software filesets .............. OK
The system is ready.
GenericSysName [HP Release B.11.31] (see /etc/issue)
Console Login:
